Diaphragm Pumps Ltd

Wilden Air Operated Double Diaphragm (AODD) Pumps are becoming the most common pumps for use when Only Air is available or when pumping solid laden liquids or slurries. Wilden Diaphragm Pumps have no seals as the diaphragm acts as the barrier between the Liquid side and the drive side of the pump. When the liquid pressure reaches the air pressure, the Wilden pump reaches a point of balance and stalls without the need for bypasses or overload protection.Wilden Diaphragm Pumps pump can run dry indefinately and have the ability to self prime to 7 metres or more in some cases. They can handle viscosities up to 20000 Centipoise as standard and some Wilden models can handle cPs into the 100's of 1000's. Wilden Pumps are some of the most reliable AOD's in the marketplace, Self Priming, Dry running, Intrinsically safe, these are just a few of the features of Wilden Diaphragm Pumps. Models include pumps for pumping hygienic products, aggressive chemicals aswell as standard industrial duties. High pressure models are also available for filter press applications or for pumping into closed systems. ATEX regulated Wilden pumps are offered for Zone 1 environments. Wilden Pumps and spares are available from Diaphragm Pumps Ltd, Stoke On Trent, England. As one of the largest stockists of pumps and spares in Europe, we hope we can supply all your Wilden Pump needs.



Wilden

Diaphragm Pumps Ltd is one of the largest UK stockists of Genuine Wilden AODD Pumps and spares.

Call now for immediate despatch of your Wilden pump or parts.

We stock Wilden Pumps with full C.E. Certification and if required full Compliance to the ATEX 94/9/EC Directive

Since 1955 Wilden has been the market leader in air-operated-double-diaphragm pumps. Wilden is deeply committed to the pursuit of excellence, customer satisfaction, research & development and market knowledge. As a premiere organization, Wilden has the infrastructure, knowledge base, and intellectual capital to exceed customer expectations worldwide.

The Wilden Pump is available in various sizes ranging from 6 mm (¼") to 203 mm (8") allowing for optimum flow rates. A wide variety of construction options are available to meet virtually any application requirement. The Wilden pump can handle pressures up to 21bar (305 psig)* and temperatures to 176.7° C (350° F). Liquid path materials of construction include: Aluminium, Cast Iron, Stainless Steel, Hastalloy, Polyethylene, Polypropylene, PVDF, carbon-filled (Acetal, Polyethylene, Teflon®, PTFE) Teflon® PFA, and PTFE.

*Limited options, typical max pressure 8 bar

Diaphragm Pumps ltd. is not affiliated with the Original Equipment Manufacturer Mentioned on this website. Click Here for Manufacturers website. © Wilden Pump & Engineering Company