Diaphragm Pumps Ltd

Reko Air Operated Double Diaphragm (AODD) Pumps are becoming the most common pumps for use when Only Air is available or when pumping solid laden liquids or slurries. Reko Diaphragm Pumps have no seals as the diaphragm acts as the barrier between the Liquid side and the drive side of the pump. When the liquid pressure reaches the air pressure, the Reko pump reaches a point of balance and stalls without the need for bypasses or overload protection.Reko Diaphragm Pumps pump can run dry indefinately and have the ability to self prime to 7 metres or more in some cases. They can handle viscosities up to 20000 Centipoise as standard and some Reko models can handle cPs into the 100's of 1000's. Reko Pumps are some of the most reliable AOD's in the marketplace, Self Priming, Dry running, Intrinsically safe, these are just a few of the features of Reko Diaphragm Pumps. Models include pumps for pumping hygienic products, aggressive chemicals aswell as standard industrial duties. High pressure models are also available for filter press applications or for pumping into closed systems. ATEX regulated Reko pumps are offered for Zone 1 environments. Reko Pumps and spares are available from Diaphragm Pumps Ltd, Stoke On Trent, England. As one of the largest stockists of pumps and spares in Europe, we hope we can supply all your Reko Pump needs.



REKO

GENERAL INFORMATION ABOUT THE REKO AIR DRIVEN DIAPHRAGM PUMPS

About 15 years ago REKO Industrial Equipment B.V. started developing the REKO air driven diaphragm pump in order to fill the need on the market for a reliable process pump (with low maintenance cost), which can operate 24 hours a day, 7 days a week under heavy conditions.
The pump has a compact and rigid structure. All wetted pumpbody parts are fabricated from high quality polypropylene (PP). On request we can also deliver materials, as polyvinylidenfluoride (PVDF) and polytetronfluorethylene (PTFE).
Applications: from water to pastes, neutral or aggressive liquids, shear-sensitive, thixotrope, wearing and corrosive liquids, but also sludge and gas-liquid mixtures.
REKO was recently purchased by Flux Pumps.

RFM 10
  • Max. capacity : 25 lpm
  • Max. operating pressure : 8 bar
  • Pumphousing available in PP, PVDF and PTFE
  • Diaphragms available in NBR, EPDM, FKM and PTFE

RFM 15
  • Max. capacity : 33 lpm
  • Max. operating pressure : 8 bar
  • Pumphousing available in PP, PVDF and PTFE
  • Diaphragms available in NBR, EPDM, FKM and PTFE

REKO air driven diaphragm pump RFM 25
  • Max. capacity : 85 lpm
  • Max. operating pressure : 8 bar
  • Pumphousing available in PP, PVDF and PTFE
  • Diaphragms available in NBR, EPDM, FKM and PTFE

REKO air driven diaphragm pump RFM 40
  • Max. capacity : 235 lpm
  • Max. operating pressure : 8 bar
  • Pumphousing available in PP, PVDF and PTFE
  • Diaphragms available in NBR, EPDM, FKM and PTFE

REKO air driven diaphragm pump RFM 50
  • Max. capacity : 385 lpm
  • Max. operating pressure : 8 bar
  • Pumphousing available in PP, PVDF and PTFE
  • Diaphragms available in NBR, EPDM, FKM and PTFE

Diaphragm Pumps ltd. is not affiliated with the Original Equipment Manufacturer Mentioned on this website. Click Here for Manufacturers website



13th May 2008
14:34 PM
  • Recent Pages