Diaphragm Pumps Ltd

Flotronic Air Operated Double Diaphragm (AODD) Pumps are becoming the most common pumps for use when Only Air is available or when pumping solid laden liquids or slurries. Flotronic Diaphragm Pumps have no seals as the diaphragm acts as the barrier between the Liquid side and the drive side of the pump. When the liquid pressure reaches the air pressure, the Flotronic pump reaches a point of balance and stalls without the need for bypasses or overload protection.Flotronic Diaphragm Pumps pump can run dry indefinately and have the ability to self prime to 7 metres or more in some cases. They can handle viscosities up to 20000 Centipoise as standard and some Flotronic models can handle cPs into the 100's of 1000's. Flotronic Pumps are some of the most reliable AOD's in the marketplace, Self Priming, Dry running, Intrinsically safe, these are just a few of the features of Flotronic Diaphragm Pumps. Models include pumps for pumping hygienic products, aggressive chemicals aswell as standard industrial duties. High pressure models are also available for filter press applications or for pumping into closed systems. ATEX regulated Flotronic pumps are offered for Zone 1 environments. Flotronic Pumps and spares are available from Diaphragm Pumps Ltd, Stoke On Trent, England. As one of the largest stockists of pumps and spares in Europe, we hope we can supply all your Flotronic Pump needs.

Flotronic Pumps

Diaphragm Pumps Ltd. Is an official re-seller of Pumps and Spares for Flotronic Pumps
Flotronic is a world leading manufacturer of air-operated Double Diaphragm Pumps and inventor of the revolutionary ONE-NUTTM design - a concept which is transforming the way pumps are being used throughout industry today.

The One-Nut Double Diaphragm Pump, unique to Flotronic, takes pump performance far beyond traditional style Double Diaphragm pumps. This fast maintenance concept literally turns the conventional pump inside out! Fluid passes between the diaphragms directly through the centre of the pump with air pressure operating on the outside. The pump is held together by one nut on the opposite side of the pump to the external air valve.

This design allows in-line diaphragm replacement to be accomplished in less than 15 minutes, with a complete stripdown and rebuild possible in less than 20 minutes. Using One-Nut pumps, engineers can significantly reduce process downtime and provide vast savings in maintenance costs, without compromising on pump performance.

Diaphragm lifetime is now so good, these pumps are often used instead of centrifugal or other process pumps.
One Nut is a Trade Mark used by Flotronic Pumps Ltd

Slim Style
 F Series award-winning metal pumps
Slim Style - click for data sheet

Machined from solid material, these compact and self-draining pumps are available in 316 stainless steel, aluminium and also exotic metals, including Hastelloy®.
These pumps can be used in a wide range of industries including chemical, cosmetic, paints, pharmaceutical, adhesive and hygienic applications.
Voted winner of the prestigious Food Hygiene Award for Food Processing and Manufacture.
Only ‘one nut’ to access diaphragms with pump ‘in-line’
Only four nuts and bolts to access balls and seats (where fitted)
Only four bolts to maintain air valve with pump ‘in-line’
Max operating temp 121ºC (250ºF) with high temp diaphragm (specify H as 6th digit in pump code)
 
500 Style
 F Series Polypropylene, PVC, PVDF and aluminium pumps
500 Style - click for data sheet

Solid blocks of plastic supported by metal air domes, top and bottom plates and through studs offer safety without compromising fast maintenance.
Normally used for solvents/chemicals and dyes and often as a less expensive option for stainless steel.
Only ‘one nut’ to access diaphragms with pump ‘in-line’
Only four nuts to access balls and seats
Only four bolts to maintain air valve with pump ‘in-line’
Max operating temp 80ºC (176ºF) for Polyproylene, PVC, PVDF pumps
Max operating temp 121ºC (250ºF) for Aluminium pumps fitted with high temp diaphragms (specify H as 6th digit in pump code)
 
710 Style
 F Series stainless steel and exotic metal pumps
710 Style - click for data sheet

Fabricated 316 or 304 stainless steel or Hastelloy® on all wetted metal parts offers unrivalled versatility.
These pumps are used extensively throughout industry from acids to adhesives, cosmetics to ceramics, petrochemicals to paper stock and solvents to solids in suspension. Even dairy and food stuffs.
Only ‘one nut’ to access diaphragms with pump ‘in-line’
Only two nuts and bolts to access balls and seats
Only four bolts to maintain air valve with pump ‘in-line’
Max operating temp 121ºC (250ºF) with high temp diaphragm (specify H as 6th digit in pump code)
 
K Style
 F Series Chemflo virgin and anti-static PTFE pumps
K Style - click for data sheet

A solid block of virgin or anti-static PTFE housed completely inside an outer metal ‘Pressure Vessel’ of carbon or stainless steel gives inherent safety whilst retaining ‘one nut’ maintenance.
Used for extremely hazardous acids and chemicals where only PTFE can be used and often in pilot plants or as emergency pumps where chemicals are unknown.
The ultimate solid PTFE Double Diaphragm Pump.
A 90º PTFE-lined elbow will fit between the pump legs as shown.
(This part can be supplied by Flotronic if required).
Max operating temp 121ºC (250ºF) with high temp diaphragm (specify H as 6th digit in pump code)

12th May 2008
23:25 PM

  • Recent Pages